How to Replace Engine Torque Strut Mount 06-11 Honda Civic
Difficulty: Intermediate · About 30 min · Honda Civic
Replace the engine torque strut mount (torque rod), including supporting the engine with a jack, on a 2006-2011 Honda Civic.
Tools you will need
- Socket extensions
- Torque wrench
- Rust penetrant
- 17mm socket
- White grease
- Ratchet
- Floor jack
- Block of wood
- Breaker bar
Parts and supplies
- Engine torque strut mount
Steps
- Remove the torque rod
Place a block of wood on a floor jack under the oil pan and raise it to support the engine, break loose the torque rod's three bolts with a 17mm socket and breaker bar, remove them along with the counterweight, then slide the torque rod out.
- Install the torque rod
Apply white grease to the mounting area, line up the torque rod and its counterweight with the bolt holes, start the three bolts and tighten them to about 47 ft-lb, then lower the jack from under the engine.
Check your vehicle’s repair manual for exact specifications and fit.