How to Replace Alternator 94-01 Toyota Camry
Difficulty: Intermediate · About 45 min · Toyota Camry
Replace a failed alternator on a 1994-2001 Toyota Camry, including loosening the drive belt to free the old unit.
Tools you will need
- Ratchet
- 12mm socket
- 13mm socket
- 14mm socket
- 10mm wrench
- 10mm socket
- 12mm wrench
Parts and supplies
- Alternator
Steps
- Disconnect the battery
Disconnect the negative battery cable before working near the alternator and its wiring.
- Loosen the belt and unbolt the old alternator
Back off the 14mm and 13mm mounting bolts just enough to slacken the drive belt, slip the belt off the pulley, unplug the electrical connector, then remove the bolts the rest of the way and lift the alternator out.
- Mount the new alternator
Set the new alternator in place, start its mounting bolts, loop the belt back over the pulley, then tighten the bolts fully.
- Reconnect the battery
Reconnect the negative battery cable and confirm the alternator is charging once the engine is running.
Check your vehicle’s repair manual for exact specifications and fit.