How to Replace Side Mirror 98-04 Dodge Intrepid
Difficulty: Intermediate · About 45 min · Dodge Intrepid
Replace a side mirror on a 1998–2004 Dodge Intrepid by removing the door panel and water shield, unplugging the mirror, and restoring all harness clips.
Tools you will need
- Phillips screwdriver
- 8mm socket and ratchet
- Flat blade screwdriver
Parts and supplies
- Side mirror
Steps
- Remove the door panel
Release the handle and pull covers, speaker grille, and triangular mirror trim. Remove the panel screws, free its clips, lift it away, disconnect the harnesses and cables, and peel back the water shield.
- Remove the old mirror
Unplug the mirror harness and remove its two Phillips screws and two 8mm nuts. Support the mirror as it comes free and guide its wiring through the door opening.
- Install the replacement mirror
Route the new harness through the door and align the mirror to its mounting holes. Reinstall the two nuts and two screws, then reconnect the electrical plug.
- Restore water shield and trim
Reconnect the door-panel wiring and cables, then reseal the water shield. Align the panel on the window sill and lock, press its clips in, and reinstall the screws and trim pieces.
Check your vehicle’s repair manual for exact specifications and fit.