How to Replace Radiator Cooling Fan 01-03 Volvo V70
Difficulty: Intermediate · About 30 min · Volvo V70
Replace the radiator cooling fan on a 2001-2003 Volvo V70.
Tools you will need
- Socket driver
- 10mm socket
- Needle-nose pliers
- Wire cutters
Parts and supplies
- Radiator cooling fan
Steps
- Disconnect the fan
Pull the air intake hose out from the bottom of the air box, remove the connectors from the fan control unit and EVAP purge valve, cut off all the zip ties, remove the purge valve's 10mm screw, then remove the fan's 10mm screws.
- Remove the old fan
Remove the plastic clip holding the power steering line to the dipstick tube, remove the EVAP valve and purge hose from the fan, push the power steering line toward the engine for clearance, then pull the fan up and out.
- Install the new fan
Fit its two tabs into their slots without pinching any wires, insert the purge hose into the shroud and the purge valve back into place, screw in the purge hose's 10mm screw, reconnect and zip-tie the harnesses, reinstall and tighten the fan's two 10mm bolts, refit the dipstick tube clip, then reinstall the air intake hose.
Check your vehicle’s repair manual for exact specifications and fit.