How to Replace Tail Light Bulbs 09-14 Nissan Murano
Difficulty: Beginner · About 20 min · Nissan Murano
Replace the tail light bulbs on a 2009-2014 Nissan Murano.
Tools you will need
- Flat blade screwdriver
- 10mm socket
- Ratchet
- Trim tool set
Parts and supplies
- Side marker bulb (194)
- Turn signal bulb (7440)
Steps
- Remove the tail light
Pry out the side trim with a trim tool or flat blade screwdriver, remove the tail light's two 10mm bolts, pry out the pins holding it to the body, then pull it out.
- Service the bulbs
Twist the bulb socket counterclockwise out of the light, pull the bulb off, push the new one on, then twist the socket clockwise back in — the side marker is a 194 bulb and the turn signal a 7440.
- Reinstall the tail light
Press it into place, tighten its 10mm bolts, then align the trim's tabs with the holes on the tail light.
Check your vehicle’s repair manual for exact specifications and fit.