How to Replace Headlight Bulb 04-07 Subaru Impreza WRX
Difficulty: Beginner · About 25 min · Subaru Impreza Wrx
Replace a headlight bulb on a 2004–2007 Subaru Impreza WRX by moving the intake tube for access, changing the bulb without touching its glass, and sealing the rear cap.
Tools you will need
- 10mm socket and ratchet
Parts and supplies
- Headlight bulb
Steps
- Move the intake tube
Open and support the hood, then remove the two 10mm intake fasteners. Move the intake tube aside carefully to reach the rear of the headlamp.
- Remove the old bulb
Rotate the rear headlamp cap counterclockwise and remove it. Disconnect the bulb harness, release its retaining clip, and withdraw the bulb straight out without touching the glass.
- Install the replacement bulb
Align the new bulb with the headlamp slots and seat it fully. Secure the retaining clip, reconnect the electrical plug, and twist the rear cap clockwise until sealed.
- Restore intake and test light
Return the intake tube to its original position and tighten both fasteners snugly. Close the hood and test the headlight beam and high-beam function.
Check your vehicle’s repair manual for exact specifications and fit.