How to Replace Trunk Latch 05-07 Chrysler 300

Difficulty: Beginner · About 35 min · Chrysler 300

Replace the trunk latch on a 2005–2007 Chrysler 300 and verify the emergency release and electrical connection.

Steps

1. Open the trunk from inside if needed

   Fold down the rear seat and use the emergency release to open the trunk if its latch has failed. Keep the release handle accessible throughout the repair and avoid closing the trunk until the new latch is tested.

2. Remove the latch cover and wiring

   Release the plastic retainers from the latch cover and remove the cover. Unplug the latch electrical connector by releasing its lock, then remove the latch mounting bolts and withdraw the assembly.

3. Install the replacement latch

   Position the replacement latch with its ground point and locating holes aligned. Start the mounting bolts by hand, tighten them to the vehicle specification, and reconnect the electrical plug securely.

4. Test before closing the trunk

   Operate the latch while the trunk remains open and confirm it releases and returns normally. Reinstall the cover and retainers only after testing, then check the key, interior release, and emergency release operation.

Check your vehicle’s repair manual for exact specifications and fit.