How to Replace Tail Light Assembly and Bulbs 06-08 Honda Pilot
Difficulty: Beginner · About 20 min · Honda Pilot
Replace a bulb or rear lamp assembly on a 2006–2008 Honda Pilot by removing the lamp fasteners and transferring the bulb sockets.
Tools you will need
- 8 mm socket and ratchet
- Phillips screwdriver
Parts and supplies
- Correct bulb or taillight assembly
Steps
Remove the lamp
Switch off the lights and ignition, then open the liftgate. Remove the taillight fasteners and ease the assembly outward without prying against the painted body.
Replace the bulb or assembly
Twist the bulb sockets free and replace any failed bulbs with matching types. If installing a new housing, transfer the sockets and inspect their seals before connecting them.
Reinstall the lamp
Align the housing with its locating points and press it evenly into place. Reinstall the fasteners and make sure the lamp sits flush with the body.
Verify lighting
Test the tail, brake, turn, and reverse lamps with a helper. Confirm the harness remains connected and the assembly is secure before driving.
Check your vehicle’s repair manual for exact specifications and fit.