How to Replace Window Regulator 01-03 Dodge Grand Caravan
Difficulty: Advanced · About 75 min · Dodge Caravan
Replace the front window regulator on a 2001–2003 Dodge Grand Caravan by supporting the glass, transferring the motor if required, and testing the regulator before reinstalling trim.
Tools you will need
- Phillips Head Screwdriver
- T30 Driver
- 10mm Wrench
- 10mm Socket
- Ratchet
- Needle nose pliers
- Wire Cutters
Parts and supplies
- Front window regulator
Steps
Remove the door panel and speaker
Switch off the ignition. Remove the pull, handle, and lower panel screws, then release the panel clips and disconnect the lock rod and wiring. Lift the panel away, remove the speaker screws, unplug the speaker, and peel back the water shield.
Support the glass and remove the regulator
Unplug the window motor and remove its fasteners. Release the glass clips from the regulator, raise the glass by hand, and secure it safely. Remove the window-track fasteners and guide the regulator out through the door; keep fingers clear of spring-loaded parts.
Install the replacement regulator
Feed the new regulator into the door and hang it on its mounting points. Install and secure its fasteners, lower the glass onto the track, and reinstall both glass clips. Refit the motor and reconnect its electrical lead.
Test the window and reassemble
Reconnect the window switch temporarily and cycle the glass to confirm smooth operation. Switch the ignition off, restore the water shield, reconnect the speaker and lock wiring, and reinstall the door panel, screws, clips, and trim.
Check your vehicle’s repair manual for exact specifications and fit.