How to Replace Wiper Transmission 01-05 Honda Civic

Difficulty: Intermediate · About 55 min · Honda Civic

Replace the wiper transmission on a Honda Civic, marking the blade park position and motor linkage orientation before disassembly.

Steps

1. Mark and remove the wiper arms

   Mark each blade's parked position on the windshield. Remove the arm caps and nuts, then rock the arms off their splines without prying against the glass.

2. Remove the cowl panels

   Open the hood, release the cowl clips and weatherstrip, and lift the panels away. Keep the clips with the panel so they can be reused.

3. Remove the wiper transmission

   Unclip the wiring and remove the transmission mounting bolts. Lift the assembly out and unplug its motor connector.

4. Transfer the motor and align the linkage

   Mark the motor shaft position relative to the linkage before separating them. Transfer the motor to the replacement, align the marks, and tighten its fasteners securely.

5. Install, cycle, and set the arms

   Reconnect the motor, secure the transmission in the cowl, and reinstall the panels and seal. Cycle the motor to its park position, align the arms to the windshield marks, and test the sweep.

Check your vehicle’s repair manual for exact specifications and fit.