How To Replace Rear Door Speaker 04-09 Subaru Outback
Difficulty: Intermediate · About 40 min · Subaru Outback
Replace a rear door speaker on a 2004–2009 Subaru Outback by removing the door panel, transferring the speaker wiring, and reinstalling the cables and trim.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Rear door speaker
Steps
- Remove the rear door panel
Release the handle and door-pull trim, then remove both Phillips screws. Free the panel clips with a trim tool, lift the panel away, and disconnect its wiring and handle cables.
- Remove the original speaker
Remove the speaker screws and pull the speaker from the door. Disconnect the harness and inspect the connector and mounting surface before fitting the replacement.
- Install the replacement speaker
Connect the harness to the new speaker and confirm the plug is secure. Seat the speaker in its opening and reinstall the Phillips screws evenly.
- Reinstall panel and test speaker
Reconnect the door handle cables and panel wiring. Hang the panel on the door, press its clips in, refit screws and trim, then play audio to check the speaker.
Check your vehicle’s repair manual for exact specifications and fit.