How to Replace Headlight Bulbs 04-09 Subaru Outback
Difficulty: Intermediate · About 45 min · Subaru Outback
Replace the high beam, low beam, and side marker bulbs on a 2004-2009 Subaru Outback.
Tools you will need
- Flat blade screwdriver
- Phillips head screwdriver
Parts and supplies
- High beam bulb
- Low beam bulb
- Side marker/turn signal bulb
Steps
- Replace the high beam bulb
Find it from the back of the headlight, disconnect its connector, twist it counterclockwise to free it, then fit the new bulb, twist it clockwise to lock, and reconnect the connector.
- Replace the driver's side low beam bulb
Unclip the washer filler neck for room, twist the gray cap counterclockwise, pull the connector straight out, undo the metal retaining clip, swap the bulb, relock the clip and connector, twist the cap clockwise, then refit the washer neck's clip.
- Replace the side marker/turn signal bulb
Turn the wheel fully to that side for room, gently peel back the splash shield, feel for the connector and twist it counterclockwise to remove the bulb and connector together, swap the bulb, then twist clockwise to lock it back in.
- Replace the passenger side headlight bulb
Remove the air intake's retaining clips and pull it aside for access, then follow the same steps as the driver's side.
Check your vehicle’s repair manual for exact specifications and fit.