How to Replace Master Power Window Switch 00-07 Toyota Highlander
Difficulty: Beginner · About 30 min · Toyota Highlander
Replace the master power window switch on a 2000–2007 Toyota Highlander by transferring its trim and reconnecting the switch harness.
Tools you will need
- Trim tool
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Master power window switch
Steps
- Remove the switch panel
Use a trim tool to lift the master switch from the door panel. Disconnect the wiring harness and set the assembly on a protected surface.
- Separate the switch from its trim
Remove the Phillips screws retaining the trim and carefully release the trim from the old switch. Keep the screws and trim positioned for transfer.
- Fit the replacement switch
Attach the trim to the replacement switch and reinstall its Phillips screws. Connect the harness and press the switch assembly into the door panel.
- Test window operation
Operate the windows using the replacement switch and confirm each responds correctly. Check that the panel sits flush and its retainers are secure.
Check your vehicle’s repair manual for exact specifications and fit.