How To Replace Grille 02-08 Dodge Ram 1500
Difficulty: Beginner · About 45 min · Dodge Ram
Replace the grille on a 2002–2008 Dodge Ram 1500 and transfer its emblem, cleaning the mounting surface before securing the replacement grille.
Tools you will need
- 8mm socket and wrench
- Ratchet
- Flat blade screwdriver
- Rust penetrant
- Grille adhesive
Parts and supplies
- Front grille
- Grille emblem adhesive as needed
Steps
Remove the old grille
Open the hood and apply penetrant to the grille fasteners if corroded. Remove the upper and lower 8mm nuts, holding a stud steady if needed, then lift the grille away.
Prepare the replacement grille
Clean the mounting area and inspect the locating pins and studs. Transfer the emblem by carefully releasing it from the old grille and following the adhesive manufacturer's directions.
Install the new grille
Align the grille locating pins with the vehicle and press it into place. Start the upper and lower nuts by hand, then tighten them securely without damaging the studs.
Check fit and emblem
Close the hood and inspect the grille alignment and emblem adhesion. Confirm the grille is stable and does not contact the hood or surrounding trim.
Check your vehicle’s repair manual for exact specifications and fit.