How to Replace Variable Valve Timing Solenoid 2.4L 02-09 Toyota Camry
Difficulty: Beginner · About 2 min · Toyota Camry
Replace the variable valve timing solenoid on a 2002–2009 Toyota Camry 2.4L by disconnecting its plug and bracket, then checking the seal and connector after installation.
Tools you will need
- Ratchet
- Socket Extensions
- Gloves
- Cloth Rags
Parts and supplies
- VVT solenoid with serviceable seal
Steps
Disconnect the bracket and wiring
With the engine cool and ignition off, move the vacuum-line bracket as needed. Unplug the solenoid connector by its body and remove the solenoid retaining bolt.
Remove the old solenoid
Twist the solenoid gently while pulling it from its bore. Catch any oil with a rag and inspect the opening for debris or a damaged sealing surface.
Install the replacement
Lightly oil the replacement seal with clean engine oil and press the solenoid squarely into place. Install its retaining bolt and reconnect the electrical plug and bracket.
Check operation
Confirm the connector locks and the harness is routed clear of hot or moving parts. Start the engine, inspect for oil leakage, and check for warning lights.
Check your vehicle’s repair manual for exact specifications and fit.