How to Replace Interior Door Handle 07-10 Hyundai Elantra
Difficulty: Intermediate · About 45 min · Hyundai Elantra
Replace the front interior door handle on a 2007–2010 Hyundai Elantra by removing the door panel, reconnecting both latch cables, and securing the handle and trim.
Tools you will need
- Phillips screwdriver
- Trim panel tool
- Pocket screwdriver
Parts and supplies
- Front interior door handle
Steps
- Remove the front door panel
Remove the screw covers and Phillips fasteners from the handle and pull. Release the panel clips, disconnect the speaker plug, lift off the panel, and unplug the switch connector.
- Remove the interior handle
Remove the three Phillips screws holding the handle assembly. Disconnect the upper lock cable and lower latch cable from their levers.
- Install the replacement handle
Reconnect the lower latch cable and upper lock cable to their matching levers. Position the handle assembly and reinstall its three retaining screws.
- Reinstall the panel and check
Reconnect the switch and speaker wiring, then hang the panel on the window edge and press its clips into place. Refit handle trim, screws, and covers, then test the lock and latch.
Check your vehicle’s repair manual for exact specifications and fit.