How to Replace Power Window Switch 98-04 Dodge Intrepid
Difficulty: Beginner · About 40 min · Dodge Intrepid
Replace the power window switch on a 1998–2004 Dodge Intrepid and reconnect the door panel harness and latch rod.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Flashlight
- Magnet - Extendable
Parts and supplies
- Power window switch
Steps
Remove the front door panel
Release the handle and pull screw covers, then remove their screws and the speaker grille. Remove the panel perimeter fasteners, lift the panel away, and disconnect the latch rod, switch wiring, and retained harness clips.
Replace the window switch
Remove the switch mounting screws and lift it from the panel. Align the replacement with its locating tabs and fasten it with the screws without overtightening the plastic bezel.
Reconnect the panel
Reconnect the switch harnesses and secure the wiring clips to the panel. Attach the latch rod, align the panel with its mounts, and press the retaining clips home before reinstalling all screws and trim.
Test switch operation
Operate each window control and verify the glass moves smoothly. Confirm the handle and lock work and that all trim covers and speaker grille are secure.
Check your vehicle’s repair manual for exact specifications and fit.