How to Replace Front Door Window Switch 14-17 Subaru Crosstrek
Difficulty: Beginner · About 60 min · Subaru Crosstrek
Replace a front door window switch on a 2014–2017 Subaru Crosstrek by removing the door panel. Keep the panel supported while disconnecting its cables and connectors, then test every switch before reassembly is complete.
Tools you will need
- Trim tool set
- Flat blade screwdriver
- Phillips head screwdriver
Parts and supplies
- Front door window switch
Steps
Remove the front door panel
Pry out the door-pull and handle covers, remove their screws, and release the panel clips with a trim tool. Lift the panel upward, disconnect the latch cables and switch plug, then set it safely aside.
Replace the window switch
Remove the switch retaining screw and press its tabs to release it from the armrest. Fit the replacement into the panel and secure it with its screw.
Reconnect and test the switch
Reconnect the switch harness and latch cables, hang the door panel on its upper edge, and press the clips home. Refit the screws and covers, then test window operation from the switch.
Check your vehicle’s repair manual for exact specifications and fit.