How to Install Front Drivers Side Door Check 01-07 Toyota Highlander
Difficulty: Intermediate · About 3 min · Toyota Highlander
Replace the driver-side front door check on a 2001–2007 Toyota Highlander by removing the interior panel and speaker, then checking the door holds at its normal stops.
Tools you will need
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Trim Tool Set
Parts and supplies
- Compatible front door check strap
Steps
Remove the door panel and speaker
Unplug the window switch, release the panel trim and clips, and disconnect the courtesy lamp. Remove the speaker and unplug its wiring to reach the door cavity.
Remove the door check
Support the door so it cannot swing unexpectedly. Remove the check-strap fasteners at the door edge and inside the door, then withdraw the strap through the opening.
Install the replacement check
Feed the new strap into the door and align its mounting holes. Install the fasteners and tighten them to the vehicle specification.
Reassemble and test
Reconnect the speaker, courtesy lamp, and window switch, then reinstall the door panel and trim. Open and close the door slowly to confirm its detents hold correctly.
Check your vehicle’s repair manual for exact specifications and fit.