How to Replace Fog Lights 07-12 Ford Escape
Difficulty: Intermediate · About 90 min · Ford Escape
Replace the fog lamps on a 2007–2012 Ford Escape by removing the front bumper cover. Disconnect both lamp harnesses, protect the bumper finish, and verify both lights before completing reassembly.
Tools you will need
- Floor jack
- Jack stands
- Trim tool set
- 10mm socket
- Ratchet
- Phillips head screwdriver
Parts and supplies
- Fog lamp assemblies
Steps
Release the bumper cover
Remove the grille fasteners, wheel-liner clips, and splash-shield bolts and screws. Release the side tabs carefully, disconnect both fog-lamp plugs, then pull the bumper forward with help.
Replace each fog lamp
Release the lamp retainers from behind the bumper and remove the old lamp. Seat each replacement fully in its opening and confirm its retaining tabs lock into place.
Reinstall the bumper and test
Reconnect both lamp harnesses, align the bumper with its guides, and reinstall the grille, wheel-well, and lower fasteners. Test both lamps and check the bumper gaps before driving.
Check your vehicle’s repair manual for exact specifications and fit.