How to Replace Engine Oil 05-11 Honda Civic

Difficulty: Beginner · About 35 min · Honda Civic

Change engine oil and filter on a 2005–2011 Honda Civic, then check the level and inspect for leaks.

Steps

1. Raise the vehicle and drain the oil

   Warm the engine briefly, switch it off, chock the wheels, and raise the vehicle at approved points with jack stands supporting it securely. Place a drain pan beneath the oil pan, remove the drain plug, and let the oil drain fully.

2. Remove the old filter

   Position the pan under the filter and loosen it with an oil filter wrench. Remove it by hand, confirm its old sealing gasket came off with it, and clean the filter mounting surface.

3. Install the new filter and plug

   Lightly coat the new filter gasket with clean oil and thread the filter on by hand until its gasket contacts the base, then tighten according to the filter instructions. Reinstall the drain plug with an undamaged washer and tighten to the vehicle specification.

4. Refill and check the oil level

   Lower the vehicle, add the specified oil gradually through the filler, and reinstall the cap. Start the engine briefly, check for leaks, shut it off, wait for oil to settle, then use the dipstick to verify and adjust the level; recycle used oil and filter properly.

Check your vehicle’s repair manual for exact specifications and fit.