How to Install Replace Front Door Speaker 2009 Honda CR-V
Difficulty: Intermediate · About 45 min · Honda Cr-v
Replace the front door speaker on a 2009 Honda CR-V by removing the door panel and handle assembly, then reconnecting the window switch and speaker wiring.
Tools you will need
- 8mm socket
- Ratchet and extensions
- Flat blade screwdriver
- Phillips screwdriver
- Trim tool
- Needle nose pliers
Parts and supplies
- Front door speaker
Steps
Remove the door panel
Release the mirror base trim and inner handle and door pull covers. Remove their screws and free the panel clips, then lift the panel away and unplug the window switch.
Remove the handle assembly and speaker
Release the handle assembly from the back of the panel. Remove the 8mm speaker fastener, ease the speaker from the door, and unplug its connector.
Install the replacement speaker
Connect the vehicle harness to the new speaker and align its locating clips with the door. Reinstall the 8mm fastener and confirm the speaker is seated.
Reinstall the panel
Reconnect the window switch and secure the handle assembly to the panel. Align the panel and press its clips in, then reinstall the screws and trim covers.
Test audio and controls
Play audio at a low volume to verify the speaker works without rattling. Test the window switch and interior handle.
Check your vehicle’s repair manual for exact specifications and fit.