How to Replace Master Window Switches 13-18 Subaru Forester

Difficulty: Intermediate · About 45 min · Subaru Forester

Replace the driver door master window switch by removing the door panel, transferring the switch module, and reconnecting each harness.

Steps

1. Remove the door panel

   Pry off the small covers and trim around the pull handle, then remove the exposed screws. Release the panel clips from the bottom and lift the panel clear of the door.

2. Separate the switch module

   Disconnect the door cables and electrical plugs, noting their locations. Remove the switch-panel screws and release its retaining tabs to free the master switch.

3. Fit the replacement switch

   Press the replacement switch into the panel until its tabs lock. Reinstall the panel screws and reconnect the wiring plugs, door cables, and courtesy light.

4. Reinstall and verify the door panel

   Hang the panel over the door ledge, align its clips, and press around the perimeter to secure it. Refit the handle trim and screws, then test all windows and locks.

Check your vehicle’s repair manual for exact specifications and fit.