How to Drain, Fill & Bleed Radiator 05-10 Chrysler 300
Difficulty: Beginner · About 20 min · Chrysler 300
Drain, fill and bleed the radiator on a 2005-2010 Chrysler 300.
Tools you will need
- Floor jack
- Jack stands
- Drain pan
- Funnel
Parts and supplies
- Coolant
Steps
- Drain the coolant
Raise and support the car, position a drain bucket, open the petcock at the bottom passenger side of the radiator, let it drain, then close the petcock.
- Refill and bleed the system
Push down and twist the cap off, set a funnel in place and fill with the correct 50/50 coolant mix, start the engine with the fan on low and heat on high, keep the level topped off while watching the temperature gauge and vents, then once you get steady heat, no more bubbles and a steady coolant level, remove the funnel and refit the cap.
Check your vehicle’s repair manual for exact specifications and fit.