How to Replace Interior Door Handle 03-05 Dodge Stratus
Difficulty: Intermediate · About 35 min · Dodge Stratus
Replace the interior door handle on a 2003–2005 Dodge Stratus by removing the door panel, transferring the handle assembly, and reconnecting the latch cables and wiring.
Tools you will need
- Flat Blade Screwdriver
- T20 Driver
- Phillips Head Screwdriver
- Putty Knife
- Door Panel Removal Tool
Parts and supplies
- Interior door handle
Steps
Remove the door panel and water shield
Switch off the ignition. Pry off the door-pull and handle trim, remove the Phillips screws, and release the panel clips with a trim tool. Lift the panel away, disconnect its wiring and latch cables, and peel back the water shield carefully.
Remove the old handle
Remove the two T20 screws securing the handle to the panel and lift the handle out. Check that its latch-cable attachments and mounting points are intact before installing the replacement.
Install the replacement handle
Seat the new handle in the panel and reinstall its two T20 screws. Confirm it sits flush and its lever moves freely before returning the panel to the door.
Reconnect the panel and test
Reconnect the wiring and latch cables, then align the panel and press its clips into place. Reinstall the screws and trim, and test the inside handle, lock, and window switch before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.