How to Replace Radiator Cooling Fan Assembly 95-03 Pontiac Sunfire
Difficulty: Intermediate · About 30 min · Pontiac Sunfire
Replace the AC condenser cooling fan assembly on a 1995-2003 Pontiac Sunfire.
Tools you will need
- Flat blade screwdriver
- 8mm wrench
- 10mm wrench
Parts and supplies
- Cooling fan assembly
Steps
- Disconnect the battery
Use an 8mm wrench to disconnect the positive battery terminal.
- Remove the old cooling fan
Pry up the push clips with a screwdriver to free the plastic panel at the edge of the engine bay above the radiator, unbolt the radiator's four 10mm bolts to free up room, raise and support the car, disconnect the fan's wiring, remove the 10mm bolts mounting it to the radiator, then lift the old fan up and out.
- Install the new cooling fan
Set the new fan into place, plug it into the wiring harness, bolt it to the radiator and secure the mounting rods, refit the radiator's four 10mm bolts, clip the plastic cover back over the engine bay, then reconnect the battery with the 8mm wrench.
Check your vehicle’s repair manual for exact specifications and fit.