How to Replace Rear Inside Door Handle 05-10 Pontiac G6
Difficulty: Beginner · About 30 min · Pontiac G6
Replace the rear interior door handle on a 2005–2010 Pontiac G6 by removing the door panel, reconnecting the latch cable, and securing the trim and fasteners.
Tools you will need
- T30 Torx driver
- Flat blade screwdriver
Parts and supplies
- Rear interior door handle
Steps
- Remove the rear door panel
Release the door-pull trim and remove its two T30 screws and the handle screw. Free the rear panel rivets, lift the panel away, and disconnect the latch cable and window wiring.
- Remove the old handle
Press the handle retaining tabs inward and push the assembly out of the panel. Inspect the opening and tabs for damage before fitting the replacement.
- Install the replacement handle
Align the new handle with the panel opening and press it in until its retaining tabs engage. Reconnect the latch cable and window switch harnesses.
- Reassemble and test
Hang the panel on the door and press its clips and plastic rivets into place. Reinstall the T30 screws and door-pull trim, then test the handle, lock, and window switch.
Check your vehicle’s repair manual for exact specifications and fit.