How to Replace Ignition Coil Pack 91-10 Ford Explorer
Difficulty: Beginner · About 25 min · Ford Explorer
Replace the ignition coil pack on a 1991-2010 Ford Explorer.
Tools you will need
- Flat blade screwdriver
- 8mm wrench
- 8mm socket
- Ratchet
- Marker
Parts and supplies
- Ignition coil pack
Steps
- Disconnect the battery
Use an 8mm wrench to disconnect the negative battery cable.
- Remove the old ignition coil
Mark the spark plug wires so you know where they go, twist and pull them off, unplug the coil's wiring harness, then unbolt its four 8mm bolts and remove it.
- Install the new ignition coil
Bolt in the four 8mm bolts, plug the coil into the wiring harness, reconnect the spark plug wires in their original order using your marks, then reconnect the negative battery terminal with the 8mm wrench.
Check your vehicle’s repair manual for exact specifications and fit.