How to Replace Door Latch Cable 06-10 Ford Explorer

Difficulty: Advanced · About 75 min · Ford Explorer

Replace a Ford Explorer door latch cable while preserving the lock actuator and window track connections, then test both inside and outside releases.

Steps

1. Remove the interior door panel

   Remove the switch and pull-handle trim, disconnect the wiring, and release the panel clips. Lift the panel away and disconnect the inside lock cable.

2. Move the lock parts for access

   Remove the lock-cylinder guard and release the rod. Unbolt and move the window track, then remove the actuator fasteners and unplug its wiring.

3. Remove and replace the latch cable

   Release the old cable from its retainers and lever, then withdraw it from the door. Route the replacement through the same path and secure both ends and its guard.

4. Reinstall lock components and test

   Reconnect the actuator wiring and lock rods, reinstall the track and lock cylinder, and refit the interior panel. Test the inside and outside handle, key lock, and power lock before closing the door.

Check your vehicle’s repair manual for exact specifications and fit.