How to Clean Throttle Body 06-10 Ford Explorer
Difficulty: Intermediate · About 45 min · Ford Explorer
Clean and reinstall the throttle body on a 2006–2010 Ford Explorer by disconnecting the intake and sensors, cleaning the bore, and fitting a sound gasket.
Tools you will need
- Flat blade screwdriver
- 8mm socket and ratchet
- Torque wrench
- Throttle body cleaner
- Soft-bristle brush
- Clean cloth
- Pick tool
Parts and supplies
- Throttle body gasket
Steps
- Remove the intake hose
Loosen the intake and throttle-body hose clamps. Disconnect the breather lines, then lift the intake hose away without letting debris enter the throttle body.
- Remove the throttle body
Disconnect the throttle position and actuator connectors. Remove the four 8mm bolts, lift the throttle body from the manifold, and remove the old gasket without scratching the sealing face.
- Clean the throttle body
Use cleaner labeled for throttle bodies and a soft-bristle brush to remove deposits. Avoid soaking electrical components or forcing the throttle plate, then wipe residue away with a clean cloth.
- Install the throttle body
Fit a sound gasket into its channel and position the throttle body on the manifold. Start all four bolts by hand and tighten them evenly to the vehicle's specification, then reconnect both sensors.
- Reconnect the intake
Refit the intake hose and reconnect both breather lines. Tighten the clamps, inspect the full intake path for gaps, then start the engine and check for leaks or abnormal idle.
Check your vehicle’s repair manual for exact specifications and fit.