How to Replace Brakes 93-99 Volkswagen Jetta
Difficulty: Intermediate · About 65 min · Volkswagen Jetta
Replace front brake pads and rotors on a Volkswagen Jetta, clean and inspect the slides, and verify a firm pedal before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 13mm Socket
- 17mm Socket
- Large C-Clamp
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Raise the vehicle and inspect
Loosen the wheel nuts with the car on the ground, raise and support it securely, then remove the wheel. Inspect pad thickness and both rotor faces for scoring or damage.
Remove the caliper and rotor
Remove the caliper bolts and support the caliper so its hose is not strained. Remove the bracket and rotor, then clean rust from the hub face.
Install new brake parts
Clean the new rotor with brake cleaner and seat it on the hub. Refit the bracket to vehicle-specific torque, retract the piston gradually, install the pads, and secure the caliper.
Reassemble and test brakes
Reinstall the wheel and torque its nuts to specification in a crossing pattern. Pump the pedal until firm and confirm braking at low speed in a safe area.
Check your vehicle’s repair manual for exact specifications and fit.