How to Replace Serpentine Belt 97-00 Ford Explorer
Difficulty: Beginner · About 25 min · Ford Explorer
Replace the serpentine belt on a 1997-2000 Ford Explorer.
Tools you will need
- Flat blade screwdriver
- 8mm socket
- 3/8 inch drive ratchet
Parts and supplies
- Serpentine belt
Steps
- Disconnect the battery
Disconnect the negative cable with an 8mm wrench.
- Remove the old belt
Unclip the air filter box, loosen the intake hose's clamps with a screwdriver and lift it out of the way, then use a 3/8 inch drive ratchet on the tensioner to relieve tension and remove the belt.
- Install the new belt
Route it per the diagram, relieve the tensioner again to loop it over the last pulley, refit the intake hose and tighten its clamp, clip the hose back to the air box, then reconnect the battery.
Check your vehicle’s repair manual for exact specifications and fit.