How to Replace Window Regulator 95-02 Toyota 4Runner
Difficulty: Intermediate · About 100 min · Toyota 4runner
Replace a power window regulator on a 1995–2002 Toyota 4Runner, taping the raised window while the regulator is removed and restoring the wiring and door panel after testing.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- Painter's Tape
- 10mm Socket
- Ratchet
Parts and supplies
- Power window regulator
Steps
Remove the door panel and water shield
Disconnect the switch, lock, and mirror wiring, then remove the door pull and handle trim and screws. Release the panel clips, lift the panel away, and carefully peel back the water shield.
Secure the window and remove the regulator
Unplug the motor and release the harness clips. Remove the window track and regulator fasteners, raise the glass by hand, loosen its mounting bolts, and tape it securely before withdrawing the regulator.
Install the replacement regulator
Feed the new regulator into the door and hang it on one mounting bolt. Install the remaining fasteners, reconnect the motor lead, lower the glass onto the regulator, and tighten its mounting bolts.
Reinstall the panel and test
Restore the water shield and connect the motor and switch wiring. Cycle the regulator briefly to confirm movement, then reconnect the door cables and wiring and refit the panel, screws, and trim.
Check your vehicle’s repair manual for exact specifications and fit.