How to Replace Headlight 95-96 Toyota Camry
Difficulty: Intermediate · About 45 min · Toyota Camry
Replace a headlight bulb or the full headlight and parking light assemblies on a 1995-1996 Toyota Camry.
Tools you will need
- Flat blade screwdriver
- Phillips head screwdriver
- 10mm socket
- Ratchet
Parts and supplies
- Headlight bulb
- Headlight assembly
- Parking light
Steps
- Swap just a bulb if needed
Reach behind the assembly, pull aside the rubber boot, unclip the retaining wire, remove the bulb, then fit the new one and reseat the wire and boot.
- Remove the parking light
Unscrew its Phillips screw, pry it out, then unplug its bulb and harness.
- Remove the grille
Unbolt its two 10mm bolts, then pull it off.
- Remove the old headlight
Remove its four 10mm bolts, pull it forward and out, then disconnect its bulbs and wiring.
- Install the new headlight and grille
Plug in the harness and bulbs, line up the assembly and bolt it back in, then bolt the grille back on.
- Reinstall the parking light
Plug in its bulb and harness, click it into place, then screw in the Phillips screw.
Check your vehicle’s repair manual for exact specifications and fit.