How to Replace Rear Door Speaker 10-16 Cadillac SRX
Difficulty: Beginner · About 35 min · Cadillac Srx
Replace a rear door speaker on a Cadillac SRX while disconnecting the panel wiring carefully and testing sound before final reassembly.
Tools you will need
- Phillips Head Screwdriver
- 7mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Rear door speaker
Steps
Remove the door panel
Pry up the window switch panel, disconnect its plugs, and remove the panel screws. Release the perimeter clips, lift the panel away, and disconnect the handle cable.
Remove the old speaker
Remove the speaker fasteners and ease the speaker from its opening. Disconnect the wiring connector without pulling on the wires.
Install the replacement speaker
Connect the harness to the new speaker, confirm the connector is fully seated, and secure the speaker in its original mounting position.
Test and reinstall trim
Test the speaker at low volume before reconnecting the door handle cable and panel harnesses. Align the panel clips, press them into place, and reinstall the screws and switch panel.
Check your vehicle’s repair manual for exact specifications and fit.