How to Replace Brake Light Switch 98-99 Ford Explorer
Difficulty: Intermediate · About 60 min · Ford Explorer
Replace the brake-light switch on a 1998–1999 Ford Explorer only after checking the bulbs and fuse, then confirm the brake lamps illuminate and extinguish correctly.
Parts and supplies
- Brake-light switch
- Switch mounting bushing
Steps
- Check bulbs and the brake-light fuse
If some brake lamps still work, inspect the failed bulbs and sockets first. If none illuminate, use the owner's manual to locate and check the brake-light fuse before replacing the switch.
- Disconnect the old switch
With the vehicle secured and ignition off, work beneath the dash and release the switch's retaining clip. Unplug the electrical connector and keep track of the small mounting bushing so it is not lost.
- Install the switch and verify the lamps
Fit the switch and mounting bushing in their original positions, secure the retaining clip, and reconnect the wiring. Press and release the brake pedal while checking that all brake lamps turn on and then go out fully.
Check your vehicle’s repair manual for exact specifications and fit.