How to Replace Fuses 07-13 Mitsubishi Outlander

Difficulty: Beginner · About 15 min · Mitsubishi Outlander

Inspect and replace a blown fuse on 2007–2013 Mitsubishi Outlander models using the panel legend and the correct amperage replacement fuse.

Steps

1. Identify the correct fuse

   Switch off the affected electrical load and ignition. Open the relevant fuse-panel cover and use its legend or the owner’s manual to identify the circuit and fuse rating.

2. Inspect and remove the fuse

   Pull the fuse straight out with the panel tool or suitable pliers. Check whether its internal link is melted or broken, and replace only a confirmed failed fuse.

3. Install the correct replacement

   Fit a fuse with the exact same amperage rating and style, pressing it fully into its original position. Never substitute a higher-rated fuse or bridge the terminals.

4. Close the panel and test

   Secure the fuse-panel cover and restore the vehicle to normal operating state. Test the circuit; if the new fuse fails again, stop and have the wiring checked for a short.

Check your vehicle’s repair manual for exact specifications and fit.