How to Replace Front Door Weatherstrip Seal 02-08 Dodge Ram

Difficulty: Beginner · About 25 min · Dodge Ram

Replace the front door weatherstrip seal on a 2002–2008 Dodge Ram and check that the door closes without leaks or wind noise.

Steps

1. Remove the old weatherstrip

   Remove the Torx screws securing the seal and pull the weatherstrip away from the door. Transfer any reusable fasteners and plastic retainer, noting the seal's orientation around the frame.

2. Install the replacement seal

   Fit the plastic retainer to the new seal and align the weatherstrip along the original path. Start the screws by hand and tighten them evenly so the seal sits flush without twists or gaps.

3. Check door closure and sealing

   Close the door gently and confirm it latches without excessive force. Inspect the seal for even contact around the frame, then use a light water spray to check for leaks and reposition any poorly seated section.

Check your vehicle’s repair manual for exact specifications and fit.