How to Replace Front Brakes 03-07 Cadillac CTS
Difficulty: Intermediate · About 60 min · Cadillac Cts
Replace front brake pads and rotors on a Cadillac CTS, cleaning the hub and caliper slides and restoring firm pedal feel before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 18mm Socket
- T30 Driver
- Large C-Clamp
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if needed
Steps
Lift and inspect the brakes
Loosen the lug nuts while the tire is on the ground, raise and support the vehicle, then remove the wheel. Check pad thickness and rotor condition.
Remove the caliper and rotor
Remove the caliper fasteners and support the caliper without loading its hose. Remove the bracket and rotor, then clean rust from the hub face.
Install the new pads and rotor
Clean the replacement rotor and seat it on the hub. Service the caliper slides, refit the bracket to vehicle-specific torque, retract the piston gradually, and install the pads and caliper.
Reassemble and verify braking
Reinstall the wheel and torque its nuts to specification in a crossing pattern. Pump the pedal until firm and test braking at low speed in a safe area.
Check your vehicle’s repair manual for exact specifications and fit.