How to Replace Side View Mirror 06-10 Ford Explorer
Difficulty: Intermediate · About 4 min · Ford Explorer
Replace the side mirror on a 2006–2010 Ford Explorer by removing the door panel and water shield, transferring the mirror cap if needed, and testing its controls.
Tools you will need
- Flat Blade Screwdriver
- 6mm Socket
- 7mm Socket
- 11mm Socket
- Socket Extensions
Parts and supplies
- Compatible side mirror assembly
Steps
Release the mirror glass and cap
Tilt the mirror glass to expose its retainers and release them carefully. Remove the mirror cap by disengaging its tabs without prying against the glass.
Remove the door panel
Lift the switch panel and unplug its connectors, then remove the panel fasteners and release the clips. Lift the panel away, disconnect the lock cable, and peel the water shield back.
Remove and replace the mirror
Move any speaker or insulation that blocks access, then remove the mirror mounting nuts and unplug its harness. Seat the replacement mirror, reconnect the plug, and tighten the nuts evenly.
Transfer the cap and refit trim
Press the cap onto the replacement and engage its retaining tabs. Restore the insulation and water shield, reconnect the lock cable and switches, and reinstall the door panel.
Test mirror and door functions
Cycle the mirror controls and confirm the glass moves in each direction. Check the window and door lock, then inspect the mirror mount for movement.
Check your vehicle’s repair manual for exact specifications and fit.