How To Replace Door Check Strap 02-09 GMC Envoy
Difficulty: Intermediate · About 90 min · Gmc Envoy
Replace the door check strap on a 2002–2009 GMC Envoy by removing the door trim and speaker for access, then testing the door's travel and detent positions before closing the panel.
Tools you will need
- Flat Blade Screwdriver
- Putty Knife
- 7mm Socket
- 10mm Socket
- Door Panel Removal Tool
- Ratchet
Parts and supplies
- Door check strap
Steps
- Remove the door panel and speaker
Release the window-switch panel and disconnect its wiring, then unplug the other door controls. Remove the pull-handle bolts, release the panel clips with a trim tool, lift the panel off, and disconnect the speaker before removing it.
- Remove the old door check
Pull the rubber grommet back from the check strap. Remove the fasteners at the door and body, then maneuver the strap through the access opening without damaging nearby wiring.
- Install the replacement check strap
Feed the new strap through the door and attach it at both mounting points. Start all fasteners by hand, align the door to its normal closed position, and tighten the hardware to specification before restoring the grommet.
- Reinstall the speaker and door panel
Reconnect and secure the speaker, then hang the door panel and press its clips into place. Reinstall the pull-handle bolts, reconnect each switch harness, and test the door's detents and controls.
Check your vehicle’s repair manual for exact specifications and fit.