How to Replace Rear Door Handle 14-17 Subaru Crosstrek
Difficulty: Beginner · About 30 min · Subaru Crosstrek
Replace the rear door handle on a 2014–2017 Subaru Crosstrek by removing the trim panel, transferring the latch cables, and testing the window switch and door latch.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Trim Tool Set
Parts and supplies
- Rear door handle
Steps
Remove the rear door panel
Switch off the ignition. Pry out the covers in the pull and handle recesses, remove the door-pull screw, and release the panel clips with a trim tool. Lift the panel upward, unplug the window switch, and disconnect the handle cables.
Remove the old handle
Remove the Phillips screws securing the handle to the panel and lift the handle out. Check its mounting tabs and cable ends for damage before fitting the replacement.
Install the replacement handle
Seat the new handle in the panel and reinstall its Phillips screws. Reconnect both latch cables to their original levers and check that each retainer is fully engaged.
Reinstall the panel and verify operation
Reconnect the window-switch harness and position the panel on the door. Press its clips home, reinstall the door-pull screw and trim covers, then test the rear handle and window switch before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.