How to Replace Side Power Mirror 97-01 Toyota Camry
Difficulty: Intermediate · About 45 min · Toyota Camry
Replace the power side mirror on a 1997–2001 Toyota Camry by removing the door panel, disconnecting the window harness, and reinstalling the switch and trim.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
- Pick tool
Parts and supplies
- Power side mirror
Steps
- Remove the door panel
Release the handle, armrest, and panel trim covers, then lift the switch panel and unplug its wiring. Remove the armrest, lower-panel, and handle screws, release the clips, and lift the panel away.
- Remove the old mirror
Disconnect the mirror harness and remove the three 10mm mounting bolts. Support the mirror from outside as the last bolt is removed, then lift the assembly away.
- Install the replacement mirror
Place the new mirror in its opening and start all three bolts by hand. Tighten them securely, reconnect the electrical harness, and check that the wire is routed clear of the glass.
- Reassemble and test the door
Lift the door panel onto the door and press its clips into place. Reconnect the switch harness, reinstall screws and trim, then test window and mirror controls.
Check your vehicle’s repair manual for exact specifications and fit.