How to Replace Exterior Door Handle 94-97 Honda Accord

Difficulty: Intermediate · About 90 min · Honda Accord

Replace the exterior door handle on a 1994–1997 Honda Accord by removing the door trim and lock mechanism, then restoring the rods and water shield.

Steps

1. Remove the door panel

   Remove the door pull and handle screws and release the rear window trim. Free the panel clips, disconnect the lock wiring and latch rod, then remove the panel bracket and peel back the water shield.

2. Move the lock mechanism

   Remove the outer handle bracket and the lock mechanism fasteners. Loosen the window track fastener and move the mechanism down to expose the handle mounts.

3. Remove the old handle

   Remove the handle mounting bolts and withdraw the handle from outside the door. Keep the lock mechanism supported and clear of the glass track.

4. Install the replacement handle

   Place the new handle into the opening and secure it with its bolts. Reposition the lock mechanism and track, reconnect its linkage, and verify the handle and lock operate before replacing trim.

5. Reassemble the door

   Restore the water shield and panel bracket. Reconnect the lock wiring and latch rod, press the door panel clips into place, and reinstall the screws and trim.

Check your vehicle’s repair manual for exact specifications and fit.