How to Replace Windshield Wiper Arm 94-97 Honda Accord
Difficulty: Beginner · About 20 min · Honda Accord
Replace the front wiper arms on a 1994–1997 Honda Accord by removing the retaining nuts, cleaning the splined posts, and aligning each blade at its parked position.
Tools you will need
- 14mm socket and ratchet
- Wire brush
Parts and supplies
- Windshield wiper arms
Steps
- Remove the old wiper arms
Open and support the hood. Remove the 14mm nuts at each arm base, then lift the arms from their splined posts without prying against the windshield.
- Clean the mounting posts
Brush corrosion and debris from the exposed splines with a wire brush. Keep debris out of the cowl and inspect the posts for damaged teeth.
- Install the replacement arms
Align each new arm so the blade rests at the correct parked position. Start the retaining nuts by hand and tighten them to the vehicle's specification, then attach the wiper blades.
- Test wiper sweep
Lower the hood and run the wipers with washer fluid. Confirm both blades sweep correctly, park below the driver's view, and do not strike the cowl or each other.
Check your vehicle’s repair manual for exact specifications and fit.