How to Replace Tail Light 98-00 Honda Accord
Difficulty: Beginner · About 20 min · Honda Accord
Replace the tail light assembly and bulbs on a 1998-2000 Honda Accord.
Tools you will need
- Flat blade screwdriver
- 8mm socket
- Ratchet
Parts and supplies
- Tail light assembly
- Tail light bulb
Steps
- Remove the taillight
Pull the center of the screw clip out then the rest, pull back the insulation, twist all the sockets out of the assembly (pulling bulbs straight out to swap them if needed), remove another clip on the plastic panel and pull the insulation further back, remove the three 8mm nuts, then pull the light out.
- Install the taillight
Line it up and push it into place, twist in the sockets, replace the three 8mm nuts, refit the insulation, then replace the clips.
Check your vehicle’s repair manual for exact specifications and fit.