How to Replace Mounted Trunk Switch 02-06 Nissan Altima
Difficulty: Beginner · About 45 min · Nissan Altima
Replace the mounted trunk release switch on a 2002–2006 Nissan Altima by removing the glove box and dashboard trim, then restoring the lamp and connectors.
Tools you will need
- Phillips screwdriver
- Trim tool
Parts and supplies
- Trunk release switch
Steps
Remove the glove box
Press the glove box hinge pins inward and lift the box free of the hinges. Disconnect its tether and set the glove box aside.
Remove the dashboard trim
Remove the four upper and two lower Phillips screws. Release the side rocker trims and carefully pry the dashboard panel from its clips, then twist the bulb socket free.
Replace the trunk switch
Disconnect the trunk switch wiring harness and press its retaining tabs to remove the switch. Seat the replacement switch in the opening and reconnect its harness.
Reinstall the dashboard trim
Reconnect the bulb socket and align the trim clips with the dash. Press the panel into place, reinstall the six screws, and refit both side trims.
Reinstall the glove box and test
Reconnect the tether and align the glove box hinges. Press the hinge pins into place and test the trunk release switch.
Check your vehicle’s repair manual for exact specifications and fit.