How to Replace Serpentine Belt 96-06 Hyundai Elantra
Difficulty: Intermediate · About 25 min · Hyundai Elantra
Replace the alternator (serpentine) belt on a 1996-2006 Hyundai Elantra.
Tools you will need
- 12mm socket
- Pipe for leverage
- 10mm wrench
- 10mm socket
- Ratchet
- 12mm wrench
Parts and supplies
- Alternator belt
Steps
- Disconnect the battery
Disconnect the negative cable with a 10mm socket and ratchet.
- Remove the old belt
Loosen the alternator adjuster's 12mm bolt and the 12mm nut at the bottom of the alternator, loosen the adjuster with a 12mm wrench, push the alternator forward, pull the belt off, then remove the splash shield's two 10mm bolts for access if needed.
- Install the new belt
Loop it around the alternator and crank pulleys, tighten the adjuster with a 12mm wrench until the belt only moves about 1/8 inch by hand, tighten the alternator's 12mm nut, then refit the splash shield and its two 10mm bolts if removed.
- Reconnect the battery
Reconnect the negative cable with the 10mm socket and ratchet.
Check your vehicle’s repair manual for exact specifications and fit.