How to Replace Front Door Window Glass 05-11 Honda Civic
Difficulty: Intermediate · About 45 min · Honda Civic
Replace front door glass on a Honda Civic by protecting the door trim and lowering the new pane carefully into the regulator tracks.
Tools you will need
- 10mm Socket
- Phillips Head Screwdriver
- Trim Tool Set
- Flat Blade Screwdriver
Parts and supplies
- Front door window glass
Steps
Remove the door panel
Release the switch and handle trim, remove the panel screws, and lift the panel away from its clips. Disconnect the lock cables and actuator, then peel back the water shield.
Remove the damaged glass
Support the pane from above, remove its two regulator fasteners, and slide the glass upward out of the door. Wear cut-resistant gloves if the pane is cracked.
Install the replacement glass
Guide the new glass down into the door and align it with both regulator clamps. Start and tighten the retainers evenly so the pane remains level in its tracks.
Test and restore the door
Cycle the window slowly and check for binding or uneven gaps. Refit the moisture barrier, reconnect the lock and switch wiring, and reinstall the door panel.
Check your vehicle’s repair manual for exact specifications and fit.