How to Check and Fill Engine Fluids 07-13 Mitsubishi Outlander
Difficulty: Beginner · About 20 min · Mitsubishi Outlander
Check the brake, coolant, washer, steering, and engine-oil fluid levels on a 2007–2013 Mitsubishi Outlander, following the correct hot or cold conditions.
Tools you will need
- Flashlight
- Clean cloth
- Vehicle-specified fluids
Steps
Inspect brake fluid
Park on level ground and compare the reservoir level with its MIN and MAX marks. Keep the cap in place unless topping up is needed, and investigate low level or contamination promptly.
Check coolant when cold
Wait until the engine is fully cold before checking the reservoir or radiator. Add only the specified coolant mixture to the correct mark and never remove a hot pressure cap.
Check washer and steering fluid
Inspect the washer-fluid reservoir and top it up with windshield washer fluid. If equipped with a serviceable hydraulic steering reservoir, check its markings and use only the specified fluid.
Read the engine-oil level
With the vehicle level and engine off, wipe and reinsert the dipstick, then read it again. Add the recommended oil in small amounts if low and recheck the level.
Close and inspect
Secure every cap and return the dipstick fully. Look for leaks and use the owner’s manual for exact fluid grades and any model-specific checking conditions.
Check your vehicle’s repair manual for exact specifications and fit.